Honeywell International Inc. IM14 Manuale Utente

The IF2 RFID antenna ports uses Reverse TNC connectors. Make sure you have 
appropriate antennas and cables for your IF2. For help, contact your sales repre-
sentative.

By default, the IF2 is configured to be a DHCP client and accepts offers from any 
DHCP server. Therefore, the IF2 will work out of the box if you connect it to your 
network and use a DHCP server to assign it an IP address. In this case, you config-
ure the IF2 using the web browser interface from a desktop PC. For help, see 

However, if you are not using a DHCP server to assign an IP address, you use a 
serial communications program such as HyperTerminal to assign a static IP 
address. For help, see the next section, “Assigning an Initial IP Address.”

After the IF2 has been assigned an IP address, connect it to your network and then 
complete the configuration by using a web browser interface from a desktop PC. 
For help, see 

.

Follow this procedure to assign an initial IP address to the IF2. After you assign the 
IP address, connect the IF2 to your network and use the web browser interface to 
complete the configuration.

Step 1.

Open a serial connection to the IF2. For help, see 

.

Step 2.

Type config and press Enter, and then type config again in the 
Password field and press Enter. The IF2 Initial Configuration screen 
appears.