Honeywell International Inc. IM14 Manuale Utente
6
IF2 Network Reader
Step 3.
If DHCP is enabled, press D. DHCP is disabled and the Ethernet
Configuration Options screen appears.
Configuration Options screen appears.
Step 4.
To set the IP address, press 1 and enter the static IP address in the entry
field.
field.
Step 5.
Press Enter. The static IP address is set. If you do not need to set the
subnet mask or IP router values, you can now continue to configure the
IF2 through the web browser interface. For help, see
subnet mask or IP router values, you can now continue to configure the
IF2 through the web browser interface. For help, see
If you need to change the values for subnet mask or the IP router, continue with the
next step.
next step.
Step 6.
To set the subnet mask, press 2 and enter the subnet mask value in the
entry field. Press Enter to save the changes.
entry field. Press Enter to save the changes.
To set the IP router address, press 3 and enter the IP router address in the
entry field. Press Enter to save the changes.
Step 7.
(Optional) To change the Ethernet link speed, press L and choose a link
speed from the list of options:
speed from the list of options:
To choose this speed:
Press:
Auto detect (default)
A
100 Mbps - full duplex
1
100 Mbps - half-duplex
2
10 Mbps - full duplex
3
10 Mbps - half duplex
4
Keep the current selection and close this dialog box
Q