Honeywell International Inc. SF61B-A Manuale Utente

The SF61B uses lights, beeps and vibrations to indicate if a bar code 
has been successfully decoded.

The blue Intermec Ready-to-Work indicator™ LED gives information 
about the Bluetooth connection. When a connection has been 
established the light is always on (blue) unless the scanner is docked 
in a charger (in this case the LED displays a green or red battery 
charge indication even though the Bluetooth connection is still 
active).

When using your scanner to scan bar codes (blue light on) your 
scanner will also flash status information using green or red lights. 
See the Status Light information in the next section.

Note: The SF61B has a different behavior (lights, beeps, vibrate alert) 
to its predecessor, the SF51. If you prefer to use the beep and LED 
mode of the SF51, you can use EasySet to activate the legacy mode 
(

Legacy mode).

Note: The blue Intermec Ready-to-Work light is enabled by default 
but you can use EasySet to disable the light or choose another color if 
you wish (

LED).

Light State

What it Means

Off

A Bluetooth connection has not been established.

Blinking, slow

The scanner is trying to establish a Bluetooth 
connection with a Bluetooth host device.

On

A Bluetooth connection is established with a 
Bluetooth base station or host computer and the 
scanner is ready to scan bar codes and send data.