Honeywell International Inc. SF61B-A Manuale Utente
Chapter 1 — About the SF61B Cordless Scanner
10
SF61 Cordless Scanner User’s Guide
Status Light
The status light flashes green or red to indicate the status of the
scanner and/or battery. Status information is sometimes shown even
if the Intermec Ready-to-Work Indicator is on. This way the scanner
can communicate more than one type of information at the same
time.
scanner and/or battery. Status information is sometimes shown even
if the Intermec Ready-to-Work Indicator is on. This way the scanner
can communicate more than one type of information at the same
time.
For example while the blue LED is on to show that there is a
Bluetooth connection, the scanner will flash green when you have
successfully scanned and transmitted a bar code.
Bluetooth connection, the scanner will flash green when you have
successfully scanned and transmitted a bar code.
Note: The following tables show the default behavior of the status
light, you can use EasySet to modify this behavior if you wish
(
light, you can use EasySet to modify this behavior if you wish
(
Operating settings > Beeps / LEDs).
Default Status Light Description During Scanner Operation
Light State
What it Means
Green light on for 2
seconds
seconds
The scanner successfully decoded a bar code and sent
the data to the host.
the data to the host.
Green light flashes
twice
twice
A configuration bar code was successfully read.
Red light comes on
for 2 seconds
for 2 seconds
Transmission error
or
Configuration bar code was not accepted
or
Configuration bar code was not accepted
Red blinking slow
Battery power is low (< 20% - need to charge).
Red continuously on
and 6 fast beeps every
2 seconds
and 6 fast beeps every
2 seconds
NVM (non-volatile memory) problem.
Default Status Light Description When the Scanner is Docked in a
Charger
Charger
Light State
What it Means
Red continuously on The battery is not fully charged and is charging.
Green continuously
on
on
The battery is fully charged.