Honeywell International Inc. SF61B-A Manuale Utente

The SF61B beeps to give you audio feedback and vibrates when 
performing some functions. For example, you hear a beep each time 
you scan a valid bar code.

Red continuously on 
and 6 fast beeps every 
2 seconds

NVM (non-volatile memory) problem.

Amber blinking

Battery charging problem:

battery failure
Solution: Replace the battery.

temperature problem: the integrated charge 
handler in the SF61B refuses to charge the battery
due to storage or use of the SF61B and/or the 
battery charger outside the recommended battery 
charging temperature range (see recommended 
"Charging" temperature range in 

 in the 

Appendix)
Solution: Move the SF61B (and battery) and/or 
battery charger to a location where they can regain 
the recommended charging temperature and 
charge the battery (no need to replace the battery).

Light State

What it Means

Note: The following table shows the default behavior of the beeps and 
vibrate alert, you can use EasySet to modify many of these settings if 
you wish (

Operating settings > Beeps / LEDs).

Beep Sequence

What it Means

Single beep and 
vibrate alert

Good read - the scanner successfully scanned a bar code. 

Two fast beeps and 
vibrate alert

Power-up.