Honeywell International Inc. SF61B-A Manuale Utente

Bluetooth device profile - SPP (*)

Pair the scanner with your device:

Double-click the Bluetooth icon in the Windows system tray 
(or equivalent). The Bluetooth Devices window showing the 
current list of paired devices is displayed.

Click 

Add a device or the equivalent command depending on 

your operating system. 

The host searches for all active Bluetooth devices within range. 
Your SF61B scanner appears in the Bluetooth device list with 
the name 

BDA, where BDA is the scanner’s Bluetooth 

Device Address (by default - name can be changed).

Select your scanner in the list and click 

Next (or the equivalent 

command).

Note: If a pairing code is requested, click Enter the device’s 
pairing code (or the equivalent command), enter the scanner’s 
pairing code (the default Intermec Bluetooth pairing code is 
“0000”) and confirm.

Your SF61B scanner is now displayed in the host PC’s list of 
paired devices. The scanner is paired but not connected to your 
host application - you will not hear the “connection successful” 
beep sequence (series of beeps from low to high) or see the blue 
Intermec Ready-to-Work indicator (default scanner behavior) 
until you connect to your host application.

SPP pairing created two Bluetooth virtual serial ports 
(Outgoing and Incoming).

Note: If the scanner does not appear in the list, it might already 
be paired with the host (under some operating systems, 
already-paired Bluetooth devices do not appear in the 
Bluetooth device search list). 

It may also be switched off and therefore not visible to the host, 
press the scan button to restart the scanner.