Honeywell International Inc. SF61B-A Manuale Utente

Use the Bluetooth disconnect procedure specific to your host 
application.

When the scanner disconnects from the host, it emits a “disconnect 
successful” beep sequence (series of beeps from high to low), and the 
blue Intermec Ready-to-Work indicator turns off (default scanner 
behavior).

A scanner-initiated (Incoming) SPP connection requires reading a 
Bluetooth association bar code then opening the Incoming port from 
the host application (a terminal emulation program for example).

The advantage of this method is that the scanner automatically tries 
to reconnect to the host application each time the connection is lost. 
This method is recommended when you are collecting data for a data 
management application.

Before trying to connect your scanner, make sure that:

it is not already trying to establish a Bluetooth connection with 
another host (blinking blue Intermec Ready-to-Work 
indicator), in this case read the 

bar code:

Bluetooth Device Disconnect

it is not already paired with your Bluetooth device using 
another profile, in this case remove it from your host’s list of 
Bluetooth devices

your host is equipped for Bluetooth communication

Scan the 

SPP Bluetooth device profile configuration code:

Bluetooth device profile - SPP (*)

make sure that your host PC is enabled for Bluetooth connection 
from an external device (your SF61B).