Honeywell International Inc. SF61B-A Manuale Utente

For an Outgoing SPP Bluetooth connection, you will need to 
know which Outgoing virtual COM port to open from your 
host application.

Note the outgoing virtual COM port that has been created:

Right-click the Bluetooth icon in the Windows system tray and 
choose 

Open Settings (or its equivalent).

A Bluetooth settings window is displayed.

Locate the 

COM Ports section and note the outgoing COM 

port number.

Close the Bluetooth settings window.

Connect the host to the scanner by opening the COM port:

Press the scan button to turn on your SF61B.

Start your host application and select the Outgoing COM port 
that you noted previously (see above).

Depending on your host configuration and the time elapsed 
since your last connection / scanner reset, a popup may 
indicate that a Bluetooth device is trying to connect.

If a pairing code is requested, click 

code (or the equivalent command) and enter the scanner’s 
pairing code (the default Intermec Bluetooth pairing code is 
“0000”)

When the scanner connects to your host application, it emits a 
series of beeps from low to high, and the blue Intermec Ready-
to-Work indicator turns solid blue (default scanner behavior).

Read the following test code and check that it is correctly displayed by 
the host application to make sure that your connection is working 
correctly:

Code 39 Test Bar Code

*123456*

*123456*