Honeywell International Inc. SF61B-A Manuale Utente

You are trying to 
establish a Bluetooth 
connection from a host 
device to your SF61B, 
but the host device 
cannot find your 
scanner.

Your SF61B may be switched off or connected to 
another Bluetooth host, or there may be a 
Bluetooth management problem on your host 
device. Try one or more of the following (see 
Chapter 2, 

 for details on the 

different pairing / connection methods):

press the scan button to power up your product

disconnect your product if it is connected to 
another host

re-pair your product with your host device

restart your host device (power down / power 
up)

You established a 
Bluetooth connection 
with an Intermec 
computer, and the 
settings on your SF61B 
were restored to their 
default values.

When you first connect to an Intermec computer, 
only SF61B settings common to the Intermec 
computer’s internal scanner settings are changed 
to the internal scanner’s default settings. Scan 
configuration bar codes, or use Intermec Settings 
on your Intermec computer to change your SF61B 
settings.

You cannot use your 
SF61B to change the 
configuration settings 
of an SD61 base station.

You must use an SF51 scanner or another 
compatible product if you want to change the 
settings of an SD61 base station.

Your scanner is 
unresponsive or appears 
to be locked.

Try to perform a hardware reset of your scanner 
(see below, , in the present chapter).
A hardware reset will restart your scanner but it 
will not reset your custom configuration settings.
Depending on the type of Bluetooth connection 
you are using, your scanner will automatically 
reconnect with your host device / application or 
you will have to reconnect manually.

The trigger button is 
stuck.

Clean around the edges of the trigger button with 
a can of compressed air.

Problem

Possible Solution