Honeywell International Inc. MX2702 Manuale Utente
1 - 9
Data Accumulation Mode
Scan the bar codes below to turn data accumulation (batch) mode on and off. If
data accumulation mode is on, bar code data is stored when the scanner is out
of range of the base and transmitted once the scanner is back in range.
data accumulation mode is on, bar code data is stored when the scanner is out
of range of the base and transmitted once the scanner is back in range.
Beeper and LED Sequences and Meaning
The IT5620 contains LEDs on the top of the unit to indicate its power up,
communication, and battery status. Simply stated, red LED = error; green
LED = success of any type. The unit’s audible indicators have meaning as well:
3 beeps = error; 2 beeps = menu change; 1 beep = all other successes.
communication, and battery status. Simply stated, red LED = error; green
LED = success of any type. The unit’s audible indicators have meaning as well:
3 beeps = error; 2 beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED illumination and beeps
for the IT5620.
for the IT5620.
IT5620 LED Sequences and Meaning
IT2020 LED Sequences and Meaning
The base contains a red LED that indicates the status of the unit and verifies its
communication with the host system and a green LED that indicates scanner
battery charge condition.
communication with the host system and a green LED that indicates scanner
battery charge condition.
LED Indication
Beeper Indication
Cause
Normal Operation
Red Flash
None
Battery low
Green Flash
1 beep
Successful communication
or linking
or linking
Red, blinking
3 beeps
Failed communication
Menu Operation
Green Flash
2 beeps
Successful menu change
Red, blinking
3 beeps
Unsuccessful menu change
Data Accumulation Mode On
* Data Accumulation Mode Off