Honeywell International Inc. MX2702 Manuale Utente

If you link a scanner to a base using the Locked Link Mode, this blocks other 
scanners from being linked if they are inadvertently placed into the base.  If you 
do place a different scanner into the base, it will charge the scanner, but the 
scanner will not be linked. 

To use a different scanner, you need to remove the original scanner by scanning 
the Unlink Scanner bar code. (See  

If you need to replace a broken or lost scanner that is linked to a base, scan the 
Override Locked Scanner bar code below and place that scanner in the base.  
The locked link will be overridden; the broken or lost scanner’s link with the base 
will be removed, and the new scanner will be linked.

When newly shipped or defaulted to factory settings, the base and scanner are 
not linked. By placing a scanner into the base, they establish a link.  Placing a 
different scanner into the base establishes a new link and the old scanner is 
unlinked.  Each time a scanner is placed into the base, it becomes the linked 
scanner; the old scanner is unlinked.

* Locked Link Mode

Override Locked Scanner 

Open Link Mode