EMS Technologies Canada Ltd. HSD-400 Manuale Utente
Page 1–2
25 June 2008
25 June 2008
EMS SATCOM
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-400 High-speed Data Terminal
To use the SBB service, the HSD-400 terminal obtains subscriber information from two SIM
cards installed in the SCM. Each SIM card slot in the SCM is associated with a specific channel
card—the slot next to the SCM connector is for channel card one, the third slot is for channel
card two.
cards installed in the SCM. Each SIM card slot in the SCM is associated with a specific channel
card—the slot next to the SCM connector is for channel card one, the third slot is for channel
card two.
The HSD-400 terminal has three different ports that support the following interfaces: EURO
ISDN S/T, serial (RS-232), and Ethernet (10BASE-T). Although able to support multiple
configurations depending on user needs, the following constraints apply:
ISDN S/T, serial (RS-232), and Ethernet (10BASE-T). Although able to support multiple
configurations depending on user needs, the following constraints apply:
•
EURO ISDN S/T port supports Swift64 Mobile ISDN (circuit-switched) only
•
RS-232 port supports MPDS only
•
10BASE-T port supports Swift64 Mobile ISDN, SBB, and MPDS
Only one service type can be used at one time-per HSD-400 terminal channel.
For information about using the HSD-400 terminal in various cabin network configurations,
refer to the eNfusion® HSD High-speed Data Terminal Developer’s Guide (MN-1252-13005).
refer to the eNfusion® HSD High-speed Data Terminal Developer’s Guide (MN-1252-13005).
2.
Equipment Specifications
Table 1-1 lists the physical characteristics and equipment specifications for the HSD-400
terminal.
terminal.
Table 1-1. HSD-400 Terminal Equipment Characteristics and Specifications
Characteristic
Specification
Certification/related documents
ARINC characteristics
600-12, Air Transport Avionics Equipment
Interfaces, December 12, 1998
Interfaces, December 12, 1998
Appendix 10 of the ARINC 704-7
RTCA documents
RTCA/DO-160D, Environmental Conditions and
Test Procedures for Airborne Equipment, July 29,
1997
Test Procedures for Airborne Equipment, July 29,
1997
HSD-400 Terminal Software
RTCA/DO-178B Level E
Physical Size
Height
19.93 cm (7.85 in)
Width
25.91 cm (10.20 in)
Length
36.45 cm (14.58 in)
Weight
14.55 Kg (32 lbs)
Mounting information
8 MCU Tray (per ARINC 600, 8 MCU LRU)
Maintenance requirements
No scheduled maintenance is required
Electrical specifications