B+B SmartWorx THINQ1 Manuale Utente

Quatech SDS User’s Manual

Configuring the SDS using a Web interface

Figure 43 - Home page screen

Figure 43 shows Quatech’s
Serial Device Server Home

page. From this screen, you
can:

Access network settings

Change serial port settings

Run diagnostics

Perform admin functions

Contact Quatech

This screen shows you the

hardware revision level, the
SDS product description, and

the software revision level.

Setting network parameters

Once you have made the initial network connection, you can maintain

and configure this connection using Quatech’s Web interface. Of course,

you can always go back and use the Installation Wizard to program the
settings for the SDS. Contact your network administrator if you are

unsure of any of these settings.

Note: If you inadvertently lose
contact with the SDS, use the
Installation Wizard to re-establish
contact.

Note: To setup for a Wireless

(Wi-Fi) SDS, you must first
connect to it using the wired

Ethernet mode. See Enabling

Wi-Fi Device Servers on page
14 for details.

Setting TCP/IP (LAN) and Wi-Fi (Wireless) parameters

Step

Procedure

Description

Preliminary

Step

Click on Network in the selection bar.

The Network Setup screen shown on

the following page displays.

March 2005

940-0183-151

Page 45