Honeywell International Inc. 8DL5821 Manuale Utente
3
SPECIFICATIONS
Power: 3V lithium battery
(Duracell DL123A, Panasonic CR123A, Sanyo CR123A,
Varta CR123A)
(Duracell DL123A, Panasonic CR123A, Sanyo CR123A,
Varta CR123A)
CAUTION: Risk of fire, explosion, and burns. Do not
recharge, disassemble, heat above 212
°F
(100
°C) or incinerate. Dispose of used batteries
promptly. Keep away from children.
Operating Temperature: -10
°C to +40°C
Operating Voltage: 3.2VDC
Dimensions:
3.1” length, 1.6”wide, 1.0”
depth
depth
Sensor Parameters:
Cold Temperature
(Freeze) Detector
(Freeze) Detector
x45°F
Warm Temperature
Detector
Detector
75°F
Hot Temperature
Detector
Detector
95°F
Refrigerator Failure
Detector
Detector
42°F
Freezer Failure
Detector
Detector
10°F
Flood Sensor
x50K Ohms
TO THE INSTALLER
The mechanism may be subject to reduced sensitivity over time.
Annual testing of the operation is recommended.
Annual testing of the operation is recommended.
Regular maintenance and inspection (at least annually) by the
installer and frequent testing by the user are vital to continuous
satisfactory operation of any alarm system.
installer and frequent testing by the user are vital to continuous
satisfactory operation of any alarm system.
The installer should assume the responsibility of developing and
offering a regular maintenance program to the user as well as
acquainting the user with the proper operation and limitations of
the alarm system and its components parts. Recommendations
must be included for a specific program of frequent testing (at least
weekly) to ensure the system’s proper operation at all times.
offering a regular maintenance program to the user as well as
acquainting the user with the proper operation and limitations of
the alarm system and its components parts. Recommendations
must be included for a specific program of frequent testing (at least
weekly) to ensure the system’s proper operation at all times.
FCC NOTICE
FCC ID: CFS8DL5821
This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CANADA: 1748A-5821
REFER TO THE INSTALLATION AND SETUP GUIDE FOR THE
CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR
WARRANTY INFORMATION AND LIMITATIONS OF THE
ENTIRE ALARM SYSTEM.
CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR
WARRANTY INFORMATION AND LIMITATIONS OF THE
ENTIRE ALARM SYSTEM.
C
US
R