Honeywell International Inc. WFSRM Manuale Utente

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C  5/8/2015

31

FWSG FlashScan Wireless System Gateway

RF DEV NO 
ANSWER

RF DEV

Latching trouble; 
remains active for 
the first 180 
seconds before it 
can be cleared 
with a system 
reset.

A wireless device that was 
part of the mesh has 
dropped from the mesh.  
The trouble is reported at 
the FACP 180 seconds 
after the device drops from 
the mesh.

Initiate a system reset at the FACP at least 
3 minutes after the trouble was initiated to 
clear.
If the device was intentionally removed, no 
further action is needed.
If the device was not intentionally 
removed, refer to panel history or active 
panel troubles to investigate the cause of 
the disturbance.

PR

A profile has been received, assigned by either SWIFT Tools or a distributor device.

PC

A profile has been created.

B

The system is currently operating in the alternate channel set due to the presences of an interference 
source such as a walkie-talkie.

SLOT REALIGNMENT 
(TEMP CHAN SET)

Slot assignments are being re-assigned to avoid empty slots. The system is currently operating in the 
alternate channel set due to the presences of an interference source such as a walkie-talkie.

SLOT REALIGNMENT

Slot assignments are being re-assigned to avoid empty slots.

RESTRUCTURING
(TEMP CHAN SET)

The gateway is performing a routine identification and assignment of optimal communication paths for 
the mesh network.  The system is currently operating in the alternate channel set due to the presences 
of an interference source such as a walkie-talkie.

RESTRUCTURING

The gateway is performing a routine identification and assignment of optimal communication paths for 
the mesh network.

RESCUE MODE (TEMP 
CHAN SET)

A device has been removed or dropped from the mesh. The mesh network is currently scanning for 
the return of the device or others with a matching profile. The system is currently operating in the 
alternate channel set due to the presences of an interference source such as a walkie-talkie.

RESCUE MODE

A device has been removed or dropped from the mesh. The mesh network is currently scanning for 
the return of the device or others with a matching profile. 

TEMP CHANNEL SET

The system is currently operating in the alternate channel set due to the presence of an interference 
source such as a walkie-talkie.

NORMAL CHANNEL SET

The system is normal.

PROFILE DISTRIBUTION 
DISABLED

The gateway has terminated the distribution of its profile.

PROFILE DISTRIBUTION 
ENABLED

The gateway has started the distribution of its profile.

SWITCH ACCESS 
ENABLED

The gateway is unlocked and the magnetic sensors on the front of the gateway are enabled.

SWITCH ACCESS 
DISABLED

The gateway is locked and the magnetic sensors on the front of the gateway are disabled. Attempts to 
active the sensors will not be recognized.

MAXIMUM DEVICE 
COUNT EXCEEDED

More than 50 devices are attempting to join the mesh network.  This is beyond the capacity of the 
mesh network.