Honeywell International Inc. WFSRM Manuale Utente

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C  5/8/2015

33

The SWIFT Network consists of the following devices:

FWD-200P - Wireless Photoelectric Smoke Detector   -FCC ID: AUBWFSSD

The wireless photoelectric smoke detector is powered by four CR123A batteries. It has a sensor 
head to detect smoke and LEDs to indicate the activation and trouble status. 

FWD-200ACCLIMATE - Wireless Acclimate Detector   FCC ID: AUBWFSSD

The wireless Acclimate detector is powered by four CR123A batteries. It has a sensor head to 
detect smoke and LEDs to indicate activation and trouble status.

FWH-200ROR135 - Wireless Rate of Rise Heat Detector  FCC ID: AUBWFSSD

The rate of rise heat detectors are powered by four CR123A batteries. The detectors have LEDs to 
indicate the activation and trouble status.

FWH-200FIX135 - Wireless 135° Fixed Heat Detector  FCC ID: AUBWFSSD

The fixed heat detectors are powered by four CR123A batteries. The detectors have LEDs to indi-
cate the activation and trouble status. 

FW-MM - Wireless Addressable Monitor Module  FCC ID: AUBWFSMM

The wireless monitor module is powered by four CR123A batteries. It can be connected to a switch 
within three feet of its location or wired directly to the pull station. The module has LEDs to indi-
cate the activation and trouble status. 

FW-RM - Wireless Addressable Relay Module  FCC ID: 

The wireless relay module is powered by four CR123A batteries

. 

It provides the system with a dry-

contact output for activating a variety of auxiliary devices, such as fans, dampers, control equip-
ment, etc. Addressability allows the dry contact to be activated, either manually or through panel 
programming, on a select basis. The module has an LED to indicate the activation and trouble sta-
tus.

For more information on the LED indicators, refer to Section 3.6.2.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: 

1. This device may not cause harmful interference. 
2. This device must accept any interference received, including interference that may cause 

undesired operation.