Honeywell International Inc. WFSSM Manuale Utente

10

SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000SK-E:B  11/9/2017

The WSK-WGI is a device in a wireless fire system that acts as a bridge between fire alarm control panels (FACPs) and wireless fire 
devices. All wireless fire devices communicate with the gateway over the wireless network formed by the devices and the gateway. 
The gateway is powered by either the SLC loop or by any external +24VDC UL listed power supply. The gateway uses the SK protocol 
on the SLC to communicate with the panel and a proprietary wireless protocol to communicate with wireless fire devices. The following 
graphic is an illustration of the components of the SWIFT Network.    

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
1.

This device may not cause harmful interference, and 

2.

This device must accept any interference received, including interference that may cause undesired operation.

This device utilizes the Honeywell915 rev A radio module and complies with IFETEL standard(s).
IFT: RCPHOSW14-1983

Following are the specifications of the wireless gateway.  

FACP

SLC

wired SLC devices

WSK-WGI

Gateway

wireless mesh 

network

SWIFT

Tools

USB adapter

WARNING: DO NOT MAKE CHANGES TO THE EQUIPMENT
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S 

AUTHORITY TO OPERATE THE EQUIPMENT.

External Supply Electrical Ratings

18V-30V

SLC Electrical Ratings

15V-30V

Maximum current when using the external supply

40mA

Maximum current when using the SLC power supply

24mA

Maximum SLC Resistance

50

Ω

Minimum signal strength level needed at the receiver for a primary path with weak 
link trouble reporting enabled.

-55dBm