Kwikbit Inc. PTP55DP Manuale Utente
M4-2000
User Guide
Kwikbit M4-2000 User Guide
Confidential & Proprietary
- 33 -
5.1.4 Installer Link Setup Tool
In addition to the full management console, each M4-2000 unit hosts a Link Setup Meter page
optimized for mobile devices.
optimized for mobile devices.
The simplified interface, showing the real-time link score for each radio, enables installers to
align links rapidly. The link score aggegates RSSI, SINR, and CRC error rate into a link quality
metric that ranges from 0 to 100. The objective of link alignment is simply to position the
metric that ranges from 0 to 100. The objective of link alignment is simply to position the
device to maximize the score: higher score is better.
Advanced users can view SINR, MCS and CRC errors.
In order to use the Link Setup Meter, connect to the management port and point your browser
at the unit. On the initial page, simply select “launch” of the link setup meter on the bottom of
Advanced users can view SINR, MCS and CRC errors.
In order to use the Link Setup Meter, connect to the management port and point your browser
at the unit. On the initial page, simply select “launch” of the link setup meter on the bottom of
the page, no login is required.
5.1.5 M4-2000 Physical Installation
Select a mounting location for the M4-2000 unit that permits easy adjustment of its vertical and
horizontal orientation and, at the same time, allows for cable connectivity and management.
Follow these steps to install the M4-2000 unit:
Follow these steps to install the M4-2000 unit:
1. Attach the unit bracket strap to the pole
2. Attach the unit with the pre-fit mounting bracket to the bracket strap. Keep the screws
2. Attach the unit with the pre-fit mounting bracket to the bracket strap. Keep the screws
loose so that the unit position can be adjusted on the pole