Bionime Corporation GM232 Manuale Utente

31

30

CAUTION
- Do not apply your blood drop to the sample port on the strip until you see the "      " appear. 

The GE006 Blood Glucose Meter is performing an internal test and will display "      " and  
“           " if you apply blood too soon. If this occurs, please repeat the test with a new test 
strip.

- Record the opening date of a new test strip vial. Discard the vial of test strips 

3 months after opening.

- Always keep the metal contacts of the test strip port clean. If any dust or 

impurities are present, please clean with a small, soft brush.

- The GE006 Blood Glucose Monitoring System and Rightest™ GD500 Lancing 
   Device are intended for a single user only. Do not share these devices with anyone, 

including other family members.

- All parts of this kit are considered biohazards and can potentially transmit infectious 

diseases, even after you have performed the cleaning and disinfecting procedure.

- Users should wash hands thoroughly with soap and water after handling the meter, 

lancing device, and test strips.

- Please refer to the section "Cleaning and Disinfecting Procedures "on page 47 for cleaning 

and disinfecting instructions.

Performing a Blood Glucose Test

Setting Markers

According to actual life status, you can set meal markers with test result.
You have to perform meal marker setting immediately after the meter displays the reading of your test 
result.

1. After test, the test result is displayed on the screen with time, date and flashing “            “.
2. Press the Right or Left button to choose among “            “  (before meal), “         “ (after meal), ”         ” (no 

marker) and “             “. Then press the Main button to confirm and save this record.

Before meal: You execute this blood glucose test before a meal.

After meal: You execute this blood glucose test after a meal.

(Blank) no marker: regular test or definition by user.

No average: You will exclude this test result from average calculation. 
Please refer to "Excluding test results from the average calculation "on page 45 for 
more information.

NOTE
If no button pressed, the marker will be set blank automatically after 15 seconds.