Bionime Corporation GM232 Manuale Utente

34

35

View Window Appearance

Make sure your blood sample covers the 
whole area of the view window to get an 
accurate test result. An insufficient blood 
sample will result in an error message ("Er4"). 
If this occurs, repeat the test with a new test 
strip.

 Insufficient blood sample

 Sufficient blood sample

CAUTION
- Check the expiration date printed on the strip vial every time you use a test strip. Do not use 

expired GE006 Blood Glucose Test Strips.

- Use each GE006 Blood Glucose Test Strip immediately after removing it from the vial.
- Do not reuse GE006 Blood Glucose Test Strips.
- 

- Apply the blood sample only on the sample port of the test strip.

Do not perform testing immediately after moving from one ambient temperature to another 

(e.g. after coming indoors  from the outside).  Allow 45 minutes for the temperature of the 
meter and the test strips to equilibrate.

Understanding Test Results and Messages

If your blood glucose result is unusually high or low, or if you question your test results, repeat the test 
with a new GE006 Blood Glucose Test Strip.

You can also  run a Quality Control Test with the 

 Control Solution GC550 to check your GE006 

Blood Glucose Meter and GE006 Test Strip (Refer to “Performing a Quality Control Test” on page 40) .

If the test result still remains unusually high or low, contact your healthcare professional immediately.

If you are experiencing symptoms that are not consistent with your blood glucose test results and you 
have made sure to follow all instructions in this manual, contact your healthcare professional 
immediately.

Consult your health care provider for appropriate disposal of used test strips and lancets.