ICOM 325000 Manuale Utente
33
6
SCAN OPERATION
D During auto memory write scanning:
• When a signal is received, the scan pauses and the
frequency is stored into an auto memory write channel
group (
group (
AW
000–
AW
199).
- 2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan automatically
• When all channels are stored, the scan automatically
stops and 1 long beep sounds.
D Re-calling the stored frequencies:
q Push [V/M] to select the memory mode.
w Push [BAND] repeatedly, or while holding down [BAND],
rotate [DIAL],to select the auto memory write channel group.
• “AW” appears.
eRotate [DIAL] to select a desired channel.
“AW” appears when the
auto memory write channel
group is selected.
auto memory write channel
group is selected.
D Clearing the stored frequencies:
qSelect the auto memory write channel group.
w While holding down [FUNC], push and hold [S.MW](V/M)
for 1 second to clear the all channels contents.
• 1 short and 1 long beep sounds.
NOTE: The auto memory write channel contents CANNOT
be cleared by an independent channel. Thus it is good
idea to copy the contents into a regular memory channel.
be cleared by an independent channel. Thus it is good
idea to copy the contents into a regular memory channel.