ICOM 325000 Manuale Utente
32
6
SCAN OPERATION
6
N Auto memory write scan
This scan is useful for searching a specified frequency
range, and automatically storing busy frequencies into
memory channels. The same frequency ranges used for a
program scan are used for an auto memory write scan.
range, and automatically storing busy frequencies into
memory channels. The same frequency ranges used for a
program scan are used for an auto memory write scan.
qStart a VFO scan.
± Push [V/M] to select the VFO mode.
± Set the squelch level.
± Hold down [SCAN](MODE) for 1 second to enter the
± Set the squelch level.
± Hold down [SCAN](MODE) for 1 second to enter the
scan type selection mode.
± Rotate [DIAL] to select a desired scanning type.
• Select “ALL” for full scan, “BAND” for band scan, “P-LINK
x” for programmed link scan (x= 0 to 9), “PROGxx” for pro-
grammed scan (xx= 0 to 24; only programmed scan edge
numbers are displayed).
grammed scan (xx= 0 to 24; only programmed scan edge
numbers are displayed).
± Push [SCAN](MODE) to start the scan.
w Push [V/M] to turn the auto memory write function ON or
OFF.
• The “
” icon blinks.
• Push [SCAN](MODE) to stop the scan.
[DIAL]
• During auto memory
write scan
The “ ” icon blinks
during auto memory
write scan.
during auto memory
write scan.