ICOM 325000 Manuale Utente

31

6

SCAN OPERATION

N Memory/all bank/bank link/bank scan

qPush [V/M] to select the memory mode.

wSet the squelch level.

e  Hold down [SCAN](MODE) for 1 second to enter the scan 

type selection mode.

rRotate [DIAL] to select a desired scanning type.

• Select “M-ALL” for all memory scan, “B-ALL” for all bank scan, 

“B-LINK” for bank link scan or “BANK-x” for bank scan (x= A to 
R, T, U, W, Y; only programmed bank groups are displayed).

[DIAL]

• All memory scan

• All bank scan

• Bank link scan

• Bank scan

Selectable between

“A” to “R,” “T,” “U,” “W” or “Y,”

if programmed

Rotate

Hold down
for 1 sec.

tTo start the scan, push [SCAN](MODE).

• The scan pauses when a signal is received.

• Rotate  [DIAL] to change the scanning direction. This also 

resumes scanning.

• Push [SCAN](MODE) again to stop the scan.

IMPORTANT!: To perform a memory or bank scan, two or 
more memory/bank channels MUST be programmed, 
otherwise the scan will not start.