ICOM 375410 Manuale Utente
14
3
BASIC OPERATION
3
201802
201802
BASIC MANUAL
■
Setting the squelch level
Noise squelch enables the audio to be heard only while
receiving a signal that is stronger than the set level. A
higher level blocks weak signals, which enables you to
receive only stronger signals. A lower level enables you to
hear weak signals.
L
“Noise squelch” is abbreviated to “Squelch” in this manual.
While holding down [SQL], rotate [DIAL] to select the
squelch level.
•“
” is displayed.
L
Information
•Options: “OPEN,” “AUTO” (default), and “LEVEL 1” ~
“LEVEL 9”
•“LEVEL 1” is loose squelch (for weak signals) and
“LEVEL 9” is tight squelch (for strong signals).
• “AUTO” is an automatic level adjustment using a noise pulse
counting system.
• “OPEN” is the continuously open setting.
•This option is not selectable in the Digital (D-STAR, P25,
dPMR, NXDN-VN, NXDN-N, or DCR) mode.
[DIAL]
[SQL]
■
Monitor function
The Monitor function is used to listen to weak signals
without changing the squelch setting.
While holding down [SQL], the receiver monitors weak
signals on the frequency.
TIP: You can set the Monitor Hold function on the MENU
screen. The receiver opens or closes the squelch each
time you push [SQL].
([MENU] > Function >
Monitor)
The first few segments
of the S-meter blinks.
■
Speech function
The Speech function audibly announces the displayed
frequency and mode by pushing [SPEECH].
Also, you can set various Speech functions, such as the
DIAL Speech function or Mode Speech function on the
MENU screen.
([MENU] > SPEECH >
DIAL SPEECH)
([MENU] > SPEECH >
MODE SPEECH)
[SPEECH]