ICOM 375410 Manuale Utente
16
3
BASIC OPERATION
3
201802
201802
BASIC MANUAL
D
Selecting the tuning step
When you select the frequency by rotating [DIAL] in the
VFO mode, it changes in the selected tuning step.
1. Push [VFO/MR] to select the VFO mode.
2. Push [TS].
3. Select a tuning step.
(Rotate [DIAL] to select it, and then push [ENTER].)
4. Push [TS].
•Returns to the Main screen.
*
1
For only the AIR band.
*
2
For only the BC band.
This receiver has 2 Frequency Selecting modes. You can change modes by pushing
[VFO/MR].
0.01 kHz 12.5 kHz
0.1 kHz 15.0 kHz
1.0 kHz 20.0 kHz
3.125 kHz 25.0 kHz
5.0 kHz 30.0 kHz
6.25 kHz 50.0 kHz
8.33 kHz*
0.1 kHz 15.0 kHz
1.0 kHz 20.0 kHz
3.125 kHz 25.0 kHz
5.0 kHz 30.0 kHz
6.25 kHz 50.0 kHz
8.33 kHz*
1
100.0 kHz
9.0 kHz*
2
125.0 kHz
10.0 kHz 200.0 kHz
■
Selecting the Frequency Selecting mode
VFO mode display
Memory mode display
D
Variable Frequency Oscillator (VFO) mode
You can set the frequency by rotating [DIAL], or by directly
entering it with the keypad.
D
Memory mode
You can set the frequency by selecting a preset channel,
using [DIAL] or keypad.
L
In the Memory mode, “MR” and Memory Channel number
are displayed.