ICOM 375410 Manuale Utente
15
3
BASIC OPERATION
201802
BASIC MANUAL
■
Setting the frequency
D
Directly entering a frequency
You can set the frequency with the keypad.
1. Push [VFO/MR] to select the VFO mode.
2. Push [F-INP].
3. Start entry with the MHz digits.
•When you finish entering the 1 kHz digit, a beep sounds
and the entered frequency is set.
L
Information
•If you want to change the digits from 100 kHz or below,
enter [.] and then enter the digits.
•If you push [ENT] when the digits from 100 kHz or
below are not entered, “0” is automatically entered into
the blank digits.
(Example: [1], [4], [5], [ENTER] → 145.000 (MHz))
•If you enter a frequency out of range, an error beep
sounds.
•Settable receiving bands differ on the A band and B
band.
(p. 17)
Keypad
[MHz]
D
Changing the frequency in MHz steps
You can change the frequency in ‘MHz’ steps for quick
tuning.
1. Push [VFO/MR] to select the VFO mode.
2. Push [MHz].
•The 1 MHz digit blinks.
3. Rotate [DIAL].
•The frequency changes in 1 MHz steps.
4. Push [MHz].
•Sets the frequency, and then returns to the Main
screen.