ICOM 375410 Manuale Utente
35
6
SCANNING
201802
BASIC MANUAL
D
Storing Skip frequencies
You can skip unnecessary frequencies during a scan.
While a scan is paused and if you want to skip the
frequency, you can store it into the Skip channel group S
(00 ~ 99) as a Skip channel (PSKIP).
The Scan Skip function speeds up a scan.
1. Start a VFO scan.
•When a signal is received, the scan pauses.
2. Hold down [SKIP] until two short beeps sound.
•The frequency is stored into the Skip channels group.
•The entered Memory channel number blinks.
•After storing, the scan resumes.
L
If there is no blank channel, an error beep sounds,
and the frequency is not stored.
D
Program Skip Scan function
This function enables the receiver to skip the unwanted
frequencies that are entered as Memory channels and are
set to “PSKIP.”
(p. 37)
[MENU] > Scan >
Program Skip
1. Push [MENU].
2. Select “Program Skip” in the “Scan” menu.
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select the Program Skip function, “ON” or “OFF,” and
then push [ENTER].
•When “ON” is selected,“PSKIP” is displayed above the
Memory channel number.
L
Push [CLEAR] to return to the Main screen.
D
Temporary Skip function
This function temporarily skips unwanted frequencies (or
memory channels) during a scan for the set period of time,
without changing the Skip Channel setting.
L
You can change
Temporary Skip Timer on the MENU
screen. (Default: 5 min)
([MENU] > Scan >
Temporary Skip Timer)
1. Start a scan.
•When a signal is received, the scan pauses.
2. After pushing [QUICK], select “Temporary Skip” and
then push [ENTER].
•The scan automatically resumes.
L
After the Temporary Skip Timer period ends, the
scan is canceled or the receiver is turned OFF, the
Temporary Skip function is turned OFF.
[SKIP]
ON
OFF
TIP:
•Up to 5 Temporary Skip frequencies or Memory channels can be set. When the 6th
frequency or Memory channel is set, the oldest setting is automatically deleted.