ICOM 375410 Manuale Utente

33

6

SCANNING

201802

BASIC MANUAL

D

You can enter the upper and lower frequency edges for a 

Program scan.

Each Program Scan range has its own tuning step, 

operating mode, and RF gain setting.

You can enter up to 50 Program Scan ranges (P-Scan 

Edge) on the MENU screen.

[MENU] > Scan > 

1.  Push [MENU].

2.  Select “P-Scan Edge” in the “Scan” menu.

    (Rotate [DIAL] to select it, and then push [ENTER].)

3.  Select a blank Program scan range “00” ~ “49.”

4.  After pushing [QUICK], select “Edit” and then push 

[ENTER].

 •The “P-Scan Edge” screen is displayed.

5.  Select “FREQ LOW” or “FREQ HIGH” to enter the 

lower edge and higher edge, and then push [ENTER].

L

 •Rotate [DIAL] to select the item, and push [ENTER] 

to enter the edit screen.

 •Enter the lower edge and higher edge using the 

keypad.

 •When the “NAME” is entered, it displays on the 

Scan Type list window. About editing character, see 

ADVANCED MANUAL for details.

 •When the “TS” (Tuning Step), “MODE” and/or “RF 

GAIN” are blanked, they are used the current setting on 

the VFO mode.

        The “TS” and “MODE” must be set to match with you 

desired signals, if you are not familiar with them, we 

recommend to set them to “Auto.”

6.  After editing contents, select “<<Write>>,” and then 

push [ENTER].

 •The confirmation dialog is displayed

7.  Select “YES,” and then push [ENTER].

 

L

Push [CLEAR] to return to the Main screen.

P-Scan Edge screen

To clear the Program scan range, 

select “Clear” at above step 4, and 

then push [ENTER].

 •The confirmation window is displayed, 

select “YES” and push [ENTER] to 

clear the Program scan range.