ICOM 375410 Manuale Utente
34
6
SCANNING
6
201802
201802
BASIC MANUAL
D
About the Program Link Scan
This item sets the Link function for 2 or more Program
Scan range to sequentially scan during a Program Link
scan. The Program Link scan scans all frequencies in the
scan ranges.
Default settings of the Program Link
...
Program Link
0:
1:
9:
Edit Name
00: 430.000−450.000
Program Link number (0 to 9)
Blank
Program Scan range (PXX)
Delete
Program Scan
lower edge
Program Scan
upper edge
L
Information
• The Program Link Number screen displays the frequency
range.
• You can add a Link setting by pushing [QUICK] when
2 or more Program Scan ranges (P-Scan Edge) are
entered.
• When there is no Program Scan range (P00 ~ P49)
entered, “Add” is not displayed after pushing [QUICK].
D
Setting the Program Link function
[MENU] > Scan >
Program Link
1. Push [MENU].
2. Select “Program Link” in the “Scan” menu.
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select a Program Link number “0” ~ “9,” and then
push [ENTER].
•The Program Link Number screen displays the
preregistered Program Scan Ranges.
4. After pushing [QUICK], select “Add” and then push
[ENTER].
5. Select the Program scan range that you want to add.
(Rotate [DIAL] to select it, and then push [ENTER].)
6. Repeat steps 4 and 5 until all Program scan ranges
that you want, are added.
7. Push [ENTER] to save the Program Link.
L
Push [CLEAR] to return to the Main screen.
L
When no Program scan
range is selected, “-- No
Edge --” is displayed.