Renkforce Funk-Wetterstation mit Gewitterwarnung Wireless Weather Station W2052GU Scheda Tecnica

Codici prodotto

W2052GU

• Press the ALARM button (14) again to activate or deactivate the alarm. The bell

symbol

appears in the display if the alarm is switched on.

• Keep the ALARM button pressed to reach the alarm setting mode. Press the + or -

buttons to enter the desired hour / minute values and press the ALARM button to

confirm the setting.

d) Snooze function and background lighting

• Press the Light / Snooze button (1) to interrupt the alarm clock and activate snooze

function. Press the ALARM button (14) to switch off the alarm for the day.

• The background lighting is activated as soon as the background lighting is connected

to the weather station. Keep the LIGHT/SNOOZE (1) button pressed to switch off the

continual background lighting. Press the LIGHT/SNOOZE (1) button again to activate

this.

• Press the Light / Snooze button (1) when operating the weather station with batteries,

to activate the background lighting for several seconds.

e) Low battery indicator

• The low battery warning display is available for the weather station and external

sensors. Replace the batteries and follow the settings procedure in these operating

instructions.

IMPORTANT: The wind direction must be recalibrated for the wind gage when

using batteries. (Details are found in chapter 9c "Installation and calibration”)

f) External sensor channel selection

• Keep the channel/+button or the Search button (12) pressed to search for an external

sensor.

• (Press the + button or -, to set the value and subsequently the Channel/+ button or

Search button (12), to confirm the setting).

Please note: If you press the Channel/+ button or the Search (12) button and

keep pressed, to search for the radio signal, all stored data is deleted when

registering an external sensor.