Renkforce Funk-Wetterstation mit Gewitterwarnung Wireless Weather Station W2052GU Scheda Tecnica

 • Press the WIND button (4) to choose between displaying the average wind speed 

and the wind gust.

 • The exterior sensor uses a wind turbine  to check the wind speed and the wind vane 

to measure the wind direction. 

 • The monitor shows 16 wind directions (N for north, S for south, SW for southwest 

and so on). Press the WIND button (4) to display the average wind speed and the 

wind gust speed. 

 • Wind direction: Average wind direction over 2 minute periods.
 • Average wind speed: Average wind speed over 2 minute periods
 • Wind gust speed: Maximum wind speed over a 10 minute period
 • To change the unit of wind speed:
 • Keep the Clock/Set button (13) pressed to reach the setting mode.
 • Press + or - to correct the selection, the Clock/Set button to confirm the setting in the

sequence below (or to skip over):

 • Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr >

Min > Yr > > Month Date > Temperature unit > Rainfall unit > Wind Speed unit (km/h, 

knots, m/s, mph, Beaufort)  > Pressure unit > Pressure value > EXIT

 • (Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr >

Min > Yr > > Month Date > Temperature unit > Rainfall unit > Wind Speed unit (km/h, 

knots, m/s, mph, Beaufort)  > Pressure unit > Pressure value > EXIT)

The wind vane of the transmission device must be aligned during installation 

To maintain the correct wind direction.

 • Please read the chapter concerning this "INSTALLATION & CALIBRATION". 
 • PLEASE NOTE: Each time the batteries are changed or the power adapter is taken away 

from the main device or the transmission device, the wind vane must be realigned. 

 • Press the RAIN (5) button to choose between the display of daily, weekly, monthly 

and total rainfall.