Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente

INSYS GPRS 5.0 serial 

 

Functions 

 

Mai 06 

            47 

Scheduled logout/login can be activated using the HSComm. Click on the tab “Basic Set-
tings”. 

 

The INSYS GPRS 5.0 serial can store the SIM card PIN inter-
nally, which enables it to log into the GSM network after each 
restart and reset, without user intervention. 
All four globally used frequency ranges 850 MHz, 900 MHz, 
1800 MHz and 1900 MHz are supported. At the respective 
location, the INSYS GPRS 5.0 serial will automatically operate 
with the frequency range provided by the network provider. 

  Before using the INSYS GPRS 5.0 serial, you should 

check the certification requirements in the country of 
deployment. 

 
 

AT**PROVIDER= 
<mode>[,<format>[,
<oper>]] 

For function support even after infrastructure changes and 
network software updates by the network providers, the IN-
SYS GPRS 5.0 serial can be logged out of the GSM network via 
a timer. The timer can be set by the hour up to a maximum of 
99 hours and starts when the device is switched on. One 
minute after the logout, the INSYS GPRS 5.0 serial will auto-
matically log back in. The timer restarts. 

 

If a TCP transparent or a data connection (CSD or GPRS) is 
established at the time of the logout, the logout will wait 
until the connection is terminated. 
In our example, the INSYS GPRS 5.0 serial will be logged out 
and back in every 3 hours. 

 

 

E.g.: 3 hours