Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente
Codici prodotto
11-02-01-03-10.014
INSYS GPRS 5.0 serial
Functions
Mai 06
49
Alternatively, automatic SMS processing can be set, changed or de-
leted using the terminal program.
Each incoming SMS is deleted after it has been processed.
Only incoming SMS messages with a command to the INSYS GPRS
5.0 serial are deleted – remote SMS are left in the buffer -.
leted using the terminal program.
Each incoming SMS is deleted after it has been processed.
Only incoming SMS messages with a command to the INSYS GPRS
5.0 serial are deleted – remote SMS are left in the buffer -.
6.4.2 Reading interval
The reading interval can be set with a command from
20 to 60 seconds.
20 to 60 seconds.
Alternatively, the GSM reading interval can be changed using the
terminal program.
Note: Due to different GSM/GPRS network structures it may occur
terminal program.
Note: Due to different GSM/GPRS network structures it may occur
that the provider cannot deliver any SMS to the GSM/GPRS
engine while data packets are sent/received via GPRS (this re-
lates to standard GPRS calls and “TCP transparent” calls via
GPRS).
Experience shows that an SMS is only sent during data
transmission intervals larger than 30 seconds.
engine while data packets are sent/received via GPRS (this re-
lates to standard GPRS calls and “TCP transparent” calls via
GPRS).
Experience shows that an SMS is only sent during data
transmission intervals larger than 30 seconds.
6.4.3 Syntax
SMS messages intended for the INSYS GPRS 5.0 serial must have the
following syntax:
[<password>,]<command>[,CN: [<callbacknumber>]]
Detailed explanation:
Configuration via SMS, without reply
Note: see also Chapt.6.1.1 - Password Protection
following syntax:
[<password>,]<command>[,CN: [<callbacknumber>]]
Detailed explanation:
Configuration via SMS, without reply
Note: see also Chapt.6.1.1 - Password Protection
and Chapt. 6.1.2 - Delete password
Configuration via SMS, with confirmation
Note: Between CN: <phonenumber> a space character must
be inserted. If no phone number is entered after CN: no
phone number, the response will automatically be sent
to the sender.
phone number, the response will automatically be sent
to the sender.
Configuration via SMS if the INSYS GPRS 5.0 serial is protected by a
password.
password.
<password>,
<command>
<command>
AT**SMSRX=1
AT**SMSRX=2
AT**GSMREQ=<n>
<command>
<command>,
CN:[<phonenumber>]
CN:[<phonenumber>]