Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente
Codici prodotto
11-02-01-03-10.014
FAQ
INSYS GPRS 5.0 serial
74
Mai 06
Problem:
Possible cause:
Remedy
Manual dialing of
ATD<ip>:<port> or
ATD<domain>:<port> is
not possible. After a
few seconds, the mes-
sages No Carrier or
No Dialtone are
displayed.
ATD<ip>:<port> or
ATD<domain>:<port> is
not possible. After a
few seconds, the mes-
sages No Carrier or
No Dialtone are
displayed.
The modem has not been
registered in the GPRS net-
work or the SIM card has
not been activated for the
GPRS service.
registered in the GPRS net-
work or the SIM card has
not been activated for the
GPRS service.
Check the GPRS registration with the
help of the terminal program.
help of the terminal program.
Switch to the terminal program
Enter the AT command AT+CGATT=1.
Afterwards, query the network registra-
tion status with AT+CGATT?.
Afterwards, query the network registra-
tion status with AT+CGATT?.
If you receive one the following mes-
sages from the INSYS GPRS 5.0 serial
sages from the INSYS GPRS 5.0 serial
:
¾
+CGATT: 1 the device is regis-
tered in the GPRS network.
¾
+CGATT: 0 the device could not
be registered in the GPRS net-
work.
work.
Please contact the contact center
of your provider.
of your provider.
The remote terminal (IP
address or URL) can not be
reached.
address or URL) can not be
reached.
Use another remote terminal for testing
purposes. Manually select
purposes. Manually select
ATD<ip>:<port> or
ATD<domain>:<port>
ATD<domain>:<port>
You may also use the URL
www.insys-tec.de:80
as re-
mote terminal. (see also Chapter 4.5
– Installation – No. 16)
– Installation – No. 16)
The virtual COM port
from INSYS should be
used. The device can
not be accessed via the
virtual COM port.
from INSYS should be
used. The device can
not be accessed via the
virtual COM port.
The virtual COM port is not
activated.
activated.
Check the settings for the virtual COM
port driver on the tab “TCP transparent”.
port driver on the tab “TCP transparent”.