Insys GSM LOGO 4.2 Compact 11-02-01-03-04.001 Manuale Utente
Codici prodotto
11-02-01-03-04.001
INSYS GSM 4.2 LOGO!
HSComm
Dezember 06
35
5.7.1 GSM Connection
5.7.1.1 PIN
The INSYS GSM 4.2 can store the PIN for the SIM card internally and use it to log in
to the GSM network independently.
To enter a PIN, select New PIN and enter the PIN. An * is displayed in place of the
entered characters. The default setting is “0000”. If the INSYS GSM 4.2 has stored
a PIN, the PIN active option is selected.
If the Delete PIN option is selected, any PIN that is stored in the INSYS GSM 4.2 will
be deleted. This option also enables operation of SIM cards without a PIN.
PIN active
to the GSM network independently.
To enter a PIN, select New PIN and enter the PIN. An * is displayed in place of the
entered characters. The default setting is “0000”. If the INSYS GSM 4.2 has stored
a PIN, the PIN active option is selected.
If the Delete PIN option is selected, any PIN that is stored in the INSYS GSM 4.2 will
be deleted. This option also enables operation of SIM cards without a PIN.
PIN active
indicates that a PIN is stored. The login state is shown underneath and
takes the following form:
GSM: Logged in
GSM: Logged in
Ready
GSM: Rejected
Access not permitted by GSM network
GSM: Not logged in
SIM accepted but no access to GSM network
GSM: Network search
Radio contact with GSM network is too weak Î
Relocate antenna
Relocate antenna
SIM PIN missing
Enter PIN for SIM card and restart the device
SIM PUK missing
PIN for SIM card locked after repeated erroneous
password entry attempts. The PUK, which can be
found in your GSM provider contract, is required.
Remove the SIM card and enter the PUK using the
menu of a standard mobile phone. Before inserting
the card, always check to make sure that the correct
PIN is stored in the INSYS GSM.
password entry attempts. The PUK, which can be
found in your GSM provider contract, is required.
Remove the SIM card and enter the PUK using the
menu of a standard mobile phone. Before inserting
the card, always check to make sure that the correct
PIN is stored in the INSYS GSM.
5.7.1.2 Service Center Number
Transmittal of alarm messages via SMS requires that you enter the number of the
SMS Service Center (SMSC) of your GSM network operator . Enter the number in
international format (e.g., Germany: +49...) .
The number of the SMS Service Center for your SIM card can be found in your
GSM provider contract.
SMS Service Center (SMSC) of your GSM network operator . Enter the number in
international format (e.g., Germany: +49...) .
The number of the SMS Service Center for your SIM card can be found in your
GSM provider contract.
5.7.1.3 Automatic SMS Evaluation
Received SMS are read out once per minute. Each SMS is checked for usability
(parameter assignment, alarm input scan, switching output setting) and, if
applicable, validity (format, password, selective call acceptance). After this
evaluation, a reply SMS is sent, if appropriate, and the SMS is then removed from
the memory. Incoming SMS can also be protected with the remote parameter
assignment password.
(parameter assignment, alarm input scan, switching output setting) and, if
applicable, validity (format, password, selective call acceptance). After this
evaluation, a reply SMS is sent, if appropriate, and the SMS is then removed from
the memory. Incoming SMS can also be protected with the remote parameter
assignment password.
5.7.1.4 SMS Memory Locations
The number of available SMS memory locations available on the SIM card is read
out using the ‘Determine SIM SMS-memory locations’ button.
out using the ‘Determine SIM SMS-memory locations’ button.