Insys GSM LOGO 4.2 Compact 11-02-01-03-04.001 Manuale Utente
Codici prodotto
11-02-01-03-04.001
INSYS GSM 4.2 LOGO!
HSComm
Dezember 06
37
5.7.2 System Monitoring
5.7.2.1 Periodic Logout/Login
To enable the GSM network operator to perform maintenance functions, it is
useful for the INSYS GSM 4.2 to briefly log out and then log in again on a daily
basis. Specify the logout time and duration (1 to 98 minutes).
Then, the INSYS GSM 4.2 logs in to the GSM network again, provided that the PIN
for the SIM card is stored.
useful for the INSYS GSM 4.2 to briefly log out and then log in again on a daily
basis. Specify the logout time and duration (1 to 98 minutes).
Then, the INSYS GSM 4.2 logs in to the GSM network again, provided that the PIN
for the SIM card is stored.
5.7.2.2 Periodic Logout and Login with Reset
In addition, a device can be reset using a logout and login operation with reset.
After the device reset, the INSYS GSM 4.2 logs in to the GSM network again,
provided that the PIN for the SIM card is stored.
After the device reset, the INSYS GSM 4.2 logs in to the GSM network again,
provided that the PIN for the SIM card is stored.
5.7.2.3 Routine Message via SMS
The INSYS GSM 4.2 can transmit a “life sign” in the form of an SMS message to the
specified call number on a daily, weekly, or monthly basis. During transmission,
the Status LED flashes.
specified call number on a daily, weekly, or monthly basis. During transmission,
the Status LED flashes.
5.7.2.4
Power-UP SMS
If this function is active, an SMS is transmitted at each power-up (but not at a
reset).
reset).
5.7.3 Date/Time of Day
Date and time of day of the INSYS GSM 4.2 real-time clock can be set as desired or
to the system time of the configuration PC.
to the system time of the configuration PC.
5.7.4 Serial Interface
The parameters for the serial interface of the INSYS GSM 4.2 cannot be changed in
the LOGO! version. These parameters are permanently set for connection to the
Siemens LOGO! (9,600 bits per second and 8E1).
the LOGO! version. These parameters are permanently set for connection to the
Siemens LOGO! (9,600 bits per second and 8E1).