Insys GSM 4.2 Compact 11-02-01-03-04.002 Manuale Utente
Codici prodotto
11-02-01-03-04.002
Initial Operation
INSYS GSM 4.2
INSYS GSM 4.2 compact
28
Sep-06
Initialization:
1.
1.
LED Connect or LED DCD light up for approx. 4 seconds.
2.
After 8 more seconds the LED Status starts to flash for approx. 20 seconds.
When the device has successfully logged in, the following LEDs will light up:
¾
LED Power
¾
LED Status
¾
The LED Signal displays the strength of the GSM signal.
3.7
Connection Test
After this successful initial configuration, you can easily check whether your INSYS GSM
is connected with the GSM network:
Dial the number of a phone connection (e.g. your mobile phone) from the terminal win-
dow of the HSComm or from your terminal program.
Dialing a telephone
<n> e.g. Number of your mobile phone
is connected with the GSM network:
Dial the number of a phone connection (e.g. your mobile phone) from the terminal win-
dow of the HSComm or from your terminal program.
Dialing a telephone
<n> e.g. Number of your mobile phone
ATD <n>
The ringing will indicate that the INSYS GSM is attempting to establish the connection.
Note
Make sure that your SIM card is enabled for incoming data connec-
tion if required (see Chap. 2.5.4).
Make sure that your SIM card is enabled for incoming data connec-
tion if required (see Chap. 2.5.4).