Secutech Radio modules ST002010 Scheda Tecnica
Codici prodotto
ST002010
Security & Electronic Technologies GmbH
Page 7
If no data are coming in from the host device A SECU-DATA 1232 will wait
for the time defined herewith and afterwards it will send the data from the
RS 232 input buffer via RF:
for the time defined herewith and afterwards it will send the data from the
RS 232 input buffer via RF:
On the other hand SECU-DATA 1232 transmits the data independently
from the time out as soon as the buffer of 64 bytes is full.
After the last input the settings stored in the internal flash memory and
SECU-DATA 1232 is restarted (RESET).
Abortion:
In case of incorrect inputs press the button “B” before you have
entered the last parameter. The new settings are deleted and SECU-DATA
1232 will be restarted (RESET).
1232 will be restarted (RESET).
Selection of RF-frequency Channel Block
SECU-DATA 1232 uses one RF-channel out of 64, these are organised in 8
blocks of 8 channels each. After delivery frequency channel block 6 is set
as default. Two SECU-DATA 1232 devices can communicate only if the
same frequency channel block is set on both devices.
blocks of 8 channels each. After delivery frequency channel block 6 is set
as default. Two SECU-DATA 1232 devices can communicate only if the
same frequency channel block is set on both devices.
RS 232 data from
Host device
Timeout
RTS of SECU-DATA 232
Data transmission via RF
Button B
Button A