Renkforce DMX LED effect light No. of LEDs: 6 SS-TE-001 TE-001 Scheda Tecnica

 

•   All persons operating, installing, setting up, commissioning or servicing this effect 

spotlight must be appropriately trained and qualified and they must follow these op-

erating instructions.

 

•   Never look directly into the light source when the device is in operation. The intense 

light rays could temporarily impair your eyesight. Moreover, they may trigger epilep-

tic seizures in vulnerable persons. This applies in particular to epileptics.

 

•   Never touch the mains plug with wet or damp hands. There is danger of a life-threat-

ening electric shock!

 

•   If the mains cable is damaged, do not touch it. First, switch off the appropriate mains 

socket (e.g. via the respective circuit-breaker and the RCD) and then carefully pull 

the mains plug from the mains socket. If the device does not work, take it to a spe-

cialist workshop. Never use the product if the mains cable is damaged.

 

•    When  installing  or  setting  up  the  product,  make  sure  that  the  mains  cable  is  not 

pinched or damaged by sharp edges.

 

•   This product is not a toy; it is not suitable for children. Children are not aware of the 

potential dangers involved when using electrical devices.

 

•   Never place vessels or containers containing liquids, such as glasses, buckets, vas-

es or plants, on the device or in its direct vicinity. Liquids may seep into the casing 

and thus impair the electrical safety of the device. Furthermore, there is a significant 

risk of fire or of a lethal electric shock! If this is the case, de-energise the appropriate 

mains socket (e.g. switch off circuit breaker and RCD) and then remove the mains 

plug from the mains socket. Afterwards, the product can no longer be used; take it to 

a specialist workshop.

 

•   Do not expose the device to high temperatures, dripping or spraying water, strong 

vibrations or heavy mechanical stress.

 

•   Do not place open flames, such as burning candles, on or close to the device.

 

•  Do not operate the device when it is unattended.

 

•  Use the device only in temperate climate regions and not in tropical ones.

 

•   Do not leave packaging materials unattended. It may become a dangerous plaything 

for children.

 

•   If in doubt about how to connect the product correctly, or should any questions arise 

that are not answered in these operating instructions, please contact our technical 

service or any other professional expert.

•  Install the effect spotlight using the holes provided in the housing on the ceiling, the wall or on a 

suitable crossbeam system. When installing it, make sure that the device cannot swing freely.

•  Secure the device with fastenings that are compatible with the fastening surface and suitable 

for carrying the weight of the light effect device.

•  Secure the installation with an additional suitable safety restraint cable or net. The safety re-

straint cable or net must be capable of supporting the light effect device in the event of a fault in 

the main support system.

G   Operating Instructions

The LED effect spotlight is intended to be used to generate light effects in light show equipment, 

party rooms, etc. and it is controlled using the integrated controller or an external DMX controller.
This product is only approved for connection to 90-240 V/50 Hz alternating current.
The DMX connector may only be connected to suitable DMX controllers.
The product may only be used in enclosed indoor locations. Outdoor use is not allowed. Contact 

with moisture, for example in bathrooms or the like, must be avoided.
Any use other than that described above could lead to damage to this product and involves risks 

such as short circuits, fire, electric shock, etc.
No part of the product may be modified or rebuilt, and the housing must not be opened.
This product complies with the applicable national and European regulations. All company and 

product names are the trademarks of their respective owners. All rights reserved.

•  LED effect spotlight
•  Operating instructions

•  6 high-output 3 W LEDs
•  LED display for easy use and operation
•  Stand-alone mode, master-slave mode and DMX mode
•  7 channel DMX mode
•  7 automatic programs
•  Sound-to-light mode with 2 different programs

   

This symbol indicates specific risks associated with handling, function and use.

 

   A triangle containing a lightning symbol indicates a health hazard, e.g., electric shock. 

The device contains no parts that should be serviced by the user. Therefore, do not 

open the device.

    This symbol on the device indicates that the user should read these operating instruc-

tions prior to putting the device into operation and follow the instructions when using 

the product.

   The symbol with the house is used to inform the user that the device may only be oper-

ated in enclosed rooms.

  This symbol indicates the minimum distance to the illuminated surfaces.

   The arrow symbol indicates special information and advice on operating the device.

 

•   For safety reasons, any unauthorised conversion and/or modification to the product 

is not permitted.

 

•   The device is manufactured according to protection class 2. Only use a standard 

mains  socket  (90-240  V/50  Hz)  connected  the  public  power  supply  system  as  the 

power source.