Benq GP30 9H.JCK77.19E Scheda Tecnica
Codici prodotto
9H.JCK77.19E
Operation 33
Disabling the password function
To disable password protection, go to Settings > Advanced > Security Settings >
Power on Lock menu. Select Off and press OK. The message “Input Password”
appears. Enter the current password.
• If the password is correct, the OSD menu returns to the Security Settings
page with “Off” shown in the row of Power on Lock. You will not have to
enter the password next time you turn on the projector.
enter the password next time you turn on the projector.
• If the password is incorrect, the password error message displays for three
seconds, and the message “Input Password” displays for you to retry. You can
press to cancel the change or try another password.
press to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should you
ever need to re-activate the password function by entering the old password.
Firmware upgrade
Follow below procedures to upgrade firmware version.
•
Only an SD Card is supported for firmware update.
•
Do not remove the SD Card while an update is in progress.
•
Do not operate any buttons during the update.
•
Do not turn the projector off during the update.
•
To confirm that the firmware has been successfully updated, go to
Settings
>
Information
>
Firmware version
.
Updating the firmware
1.
Connect the SD card containing the latest firmware to the projector.
2.
Select Settings > Advanced > Firmware Upgrade in the main menu page.
3.
Select OK to begin.
4.
After the firmware is updated, please turn off the projector.
5.
Power on the projector and check the firmware version.