Luxeon polysilicone LCD Projection lamp AV-X2Plus Manuale Utente

24

24

24

24

24

Image is “noisy” or
streaked.

Image is wider at the
top or bottom of the
screen.

Image is wider at one
side than the other

Projected colors don’t
match the computer
or video source
colors.

• From the Setup tab in the menus, adjust the frequency
and tracking manually to find an optimal setting.

• Try connecting to another computer. The problem

could be with your computer’s video card.

This keystoning effect is caused by the projection angle

not being perpendicular to the screen. For a more
pleasing image result, raise or lower the front legs or

prop up the back of the projector, or adjust keystone

function up     or down   .

Make sure the projector is at a 90 degree angle to the

screen.

Use the Image Manager to select a setting that is more

acceptable.

Important: The Image Manager settings work best if you
select Reset from the Adjust Tab each time before

selecting an Image Manager setting.

If further adjustment is needed, optimize the brightness,
tint, color and contrast from the Adjust tab in the Menus.

No sound.

Poor sound quality.

No audio-out port on
the image source.

• Adjust volume.

• Verify audio / input connections.

• Adjust audio source.

 • Make sure you are connected to the earphone jack on

your laptop or line out jack on your desktop.

•  Make sure the volume setting on your computer is

halfway.

You are not able to connect audio to the projector.