Luxeon polysilicone LCD Projection lamp AV-X2Plus Manuale Utente

 

25

English

Projector responds poorly
or not at all to the remote
control.

• Make sure that the total distance from the

remote to the projector is no more than 32 feet
(10 m).

• Point the remote control at the screen or at the

front of the projector.

• Make sure nothing is blocking the infrared

sensor on the front of the projector.

• Darken the room. The lighting might be

effecting the remote control.

• Replace the remote control batteries.

No light is coming from the
lamp.

Lamp shuts off.

• Make sure that the power cord is properly

connected to a fully functional AC electric outlet.
The Power light blinks when the power is
connected but the projector is not turned on.
The Power light is a steady green when the
lamp is running.

• Make sure that the power cord is properly

connected to the projector.

• Make sure that you have removed the lens cap

on the projector lens at the front of the projector.

• Make sure you have pressed the Power button

and the Power light is a steady green.

• Check the projector’s lamp to make sure that it

is securely connected in the lamp module.

• Make sure that the lamp module door is fully

closed.

• Make sure that the cable connectors do not

have any bent pins.

• Replace the lamp.

• A minor power surge may cause the lamp to

shut off. Press the Power button twice to turn off
the projector. (The Power light continues to
blink and the fan continues to run until the
projector cools down.) Wait at least three
minutes, then press the Power button again.

• Replace the lamp module.