Luxeon polysilicone LCD Projection lamp AV-X2Plus Manuale Utente

26

26

26

26

26

The S-Video image source
does not appear.

Only the start-up screen
appears and not the image
from the image source.

The image source is
connected but a No Signal
message appears.

Some inexpensive cables are not compatible

with the projector. Be sure to use the cable that

came with your projector.

• Verify that the cables are connected correctly.

See “Connecting the Projector” on page 7.

• Verify that the proper image source is con-

nected and that it is selected on the Setup tab
of the menus.

• Make sure that the image source is turned on.

• Turn off everything and power up again in the

proper order.

• Make sure that your laptop’s external video port

is turned on. See the computer manual for
details.

• Verify that the cables are connected correctly.

See “Connecting the Projector” on page 7.

• Verify that the proper image source is con-

nected and that it is selected on the Setup tab
of the menus.

• Make sure there are no bent pins in the

connectors.

• Make sure the image source is turned on.
• Turn off everything and power up again in the

proper order. See “Starting the Presentation” on
page 8.

• Make sure that your laptop’s external video port

is turned on. See the computer manual for
details.