Luxeon polysilicone LCD Projection lamp AV-X2Plus Manuale Utente

 

27

English

These safety precautions include information to prevent personal injury and
damage to the projector.

Warning: Statements identify conditions or practices that could result in
personal injury.

Caution: Statements identify conditions or practices that could result in
damage to your equipment.

                 Warning: For information about use of a feature, please refer to
                 this  User Guide.

                Warning: Hot surface. Do not touch.

                 Warning: To replace the lamp, turn off the power and unplug the
                 power cord. To avoid burns, wait 45 minutes before opening the
                 lamp door. Follow all instructions provided in this User Guide. See
                 “Changing the Lamp Module” on page 17.

                 Warning: When you open the lamp module door, be careful not to
                 touch the hot surfaces inside.

Warning: Please use the power cord provided. Connect the power cord to a
receptacle with a protective safety (earth) ground terminal.

Warning: Don’t look directly into the lens when the lamp is on. Doing so may
cause eye injury.

Warning: Servicing your own projector may expose you to hazards or create
potential hazards. Also, servicing your own projector will void the warranty.
Refer all service to qualified service personnel.

Warning: In the unlikely event of the bulb rupturing, thoroughly clean the area
behind the projector and discard any food that might have been contaminated
with broken glass.

Warning: Do not loosen or remove any screws other than those on the lamp
module door and the lamp module. Doing so may result in electric shock.

Caution: Don’t set liquids on the projector. Spilled liquids may damage your
projector.

Caution: Don’t put the projector on a hot surface or in direct sunlight.

Caution: Do not drop the projector.