Hunter Engineering Quick Tread Foglio Delle Specifiche
QUICK CHECK DIMENSIONS
Quick Check Drive Under with Quick Tread
Surface Mounted
Additional conduit
from pedestal to
console for a Burndy
cable (max length of
75 feet), and two Cat5
cables may also be
desired. Air supply to
pedestal should also be
considered.
OPTIONAL IN-GROUND CONDUIT SPECIFICATIONS
3 1/2 in.
STACK HEIGHT
QUICK TREAD DIMENSIONS
67 in.
(5 ft. 7 in.)
87 in.
(7 ft. 3 in.)
24 in.
(2 ft.)
36 to 96 in.
(3 ft. to 8 ft.)
44 in.
(3 ft. 8 in.)
39 in.
(3 ft 3 in.)
5 in.
17 3/8 in.
14 7/8 in.
34 1/2 in.
PEDESTAL
RAMP ONE
RAMP TWO
Form 6894-T, 02-15b
Copyright © 2015, Hunter Engineering Company
45 1/4 in.
16 1/4 in.
24 1/2 in.
135 in.
(11 ft. 3 in.)
15 in.
WITHOUT
OPTIONAL
MONITOR
See 6429-T for
support structure
details. Mounting
plate dimensions
are provided to
aid fabrication.
32 in.
23 1/2 in.
67 1/4 in.
(5 ft. 7 1/4 in.)
18 in.
WITH
OPTIONAL
MONITOR
16 in.
WITHOUT
OPTIONAL
MONITOR
22 in.
WITH
OPTIONAL
MONITOR
SENSOR PROFILE
It is recommended that a
low clearance warning be
suspended at the entrance
of Drive Under Quick
Check
®
bays.
96 in. (8 ft.) is the maximum distance
between the middle of the pedestal
and nearest edge of Quick Tread.
Any further will reduce max
vehicle test entry speed.
5 in.
PEDESTAL