CyberResearch CPEN GX-333-X Manuale Utente
CyberResearch
®
CPU Cards
CPEx GX-333-X
CyberResearch, Inc.
67
25 Business Park Drive
P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA
www.cyberresearch.com
Î
ACPI Mode
ACPI stands for Advanced Configuration and Power Interface
Under Advanced Configuration and Power Interface (ACPI
Under Advanced Configuration and Power Interface (ACPI
ACPI enables the direct control by the operating system over the power management and Plug
and Play functions of a computer. ACPI requires an ACPI-aware operating system, such as
Windows NT 4.0, Windows 98 SE, Windows 2000, and later.
and Play functions of a computer. ACPI requires an ACPI-aware operating system, such as
Windows NT 4.0, Windows 98 SE, Windows 2000, and later.
ACPI features include:
•
Plug and Play and Advanced Power Management (APM) functionality as here
contained in the BIOS Setup Utility.
contained in the BIOS Setup Utility.
•
Power management control of individual devices, add-in boards (some add-in
boards may require an ACPI-aware driver), video displays, and hard disk drives.
boards may require an ACPI-aware driver), video displays, and hard disk drives.
•
Features that enables a system to be held in a power-saving mode consuming
less than 30-watt computer operation in the Power On Suspend sleeping state,
and less than five-watt operation in the Suspend to Disk sleeping state.
less than 30-watt computer operation in the Power On Suspend sleeping state,
and less than five-watt operation in the Suspend to Disk sleeping state.
•
A soft-off feature that enables the operating system to turn off the computer.
Î
Legacy Mode
When set to Legacy, you can manually configure the parameters of the following two power-
saving modes:
saving modes:
Standby Mode
Defines the continuous idle time before the system enters Standby Mode. If any item
defined is enabled & active Standby timer will be reloaded. The standby mode turns screen
and hard drives off. The time span configurable ranges from 1 second to 120 minutes.
Defines the continuous idle time before the system enters Standby Mode. If any item
defined is enabled & active Standby timer will be reloaded. The standby mode turns screen
and hard drives off. The time span configurable ranges from 1 second to 120 minutes.
Suspend Mode
Defines the timeout before the system enters the Suspend Mode. The suspend mode
powers down the system and keeps a trickle of power. If an interrupt to RTC reaches, the
system wakes up. The time span configurable ranges from 1 second to 120 minutes.
powers down the system and keeps a trickle of power. If an interrupt to RTC reaches, the
system wakes up. The time span configurable ranges from 1 second to 120 minutes.
Î
MODEM Use IRQ
Select an interrupt request (IRQ) for the specific serial port connecting to a modem. Activity over
the IRQ line awakens the system.
the IRQ line awakens the system.
Î
Power-On by Alarm
When enabled, configurable time alarm will be available below. The system then will awake at
the preset time from the soft-off power-saving state.
the preset time from the soft-off power-saving state.
Î
IRQ Wakeup Events [Press Enter]
Press the Enter key on this item to display a list of configuration items. The system will be
awaken by the activity of the configured IRQ device. The items include:
awaken by the activity of the configured IRQ device. The items include:
9 IRQ1
(Keyboard)
[ON]
9 IRQ3
(COM2)
[OFF]
9 IRQ4
(COM1)
[OFF]