CyberResearch CPEN GX-333-X Manuale Utente

 

©Copyright 2007 CyberResearch, Inc. 

 
 

9 IRQ5 

(LPT2) 

[OFF] 

9 

IRQ6 (Floppy Disk) 

[OFF] 

9 IRQ7 

(LPT1) 

[OFF] 

9 

IRQ8 (RTC Alarm) 

[OFF] 

9 IRQ9 

(IRQ2 

Redir) 

[OFF] 

9 IRQ10 

(Reserved) 

[OFF] 

9 IRQ11 

(Reserved) 

[OFF] 

9 IRQ12 

(PS/2 

Mouse) 

[ON] 

9 IRQ13 

(Coprocessor) 

[OFF] 

9 

IRQ14 (Hard Disk) 

[OFF] 

9 IRQ15 

(Reserved) 

[OFF] 

 

 

PnP/PCI Configurations 

The PnP/PCI Configurations menu allows you to set the plug and play, and PCI options. 

Π

The PNP OS Installed option allows you to determine whether or not installing a PNP(Plug & 
Play)-aware OS onto your system.  If set to Yes, your OS should have the control over all devices 
installed.  If set to NO, your BIOS has the control instead.  For integrations involving some legacy 
ISA devices, it is recommended to turn it off.  

Π

This item allows to select to boot your system using the PCI graphics card (if implemented) or the 
onboard graphics controller.   

Π

The Reset Configuration Data option allows you to reset the Extended System Configuration 
Data (ESCD) when you exit setup if you have problems booting the system up after you have 
installed a new add-on. 

Π Disabled 

(D

EFAULT

) 

ESCD will not be reconfigured 

Π Enabled 

 

ESCD will be reconfigured after you exit setup 

Π

The Resources Controlled By option gives you the option of manually configuring all the boot 
and plug and play devices, or allowing BIOS to configure these devices automatically. If you allow 
BIOS to configure it automatically you will not be able to select the IRQs, DMA and memory base 
address fields because BIOS will automatically assign them. 

Π Auto(ESCD) 

(D

EFAULT

) 

BIOS automatically configures plug and play devices as 
well as boot devices. 

Π Manual 

 

You manually configure the plug and play devices and 
any other boot devices 

Π