CyberResearch CPEN GX-333-X Manuale Utente
CyberResearch
®
CPU Cards
CPEx GX-333-X
CyberResearch, Inc.
69
25 Business Park Drive
P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA
www.cyberresearch.com
If you select manual in the Resources Controlled By option then you will be able to configure
the IRQ Resources. To do this, select IRQ Resources and press E
the IRQ Resources. To do this, select IRQ Resources and press E
NTER
. A new menu will
appear.
The menu will have the following 12 BIOS configuration options:
1.
IRQ-3 assigned to
2.
IRQ-4 assigned to
3.
IRQ-5 assigned to
4.
IRQ-6 assigned to
5.
IRQ-7 assigned to
6.
IRQ-8 assigned to
7.
IRQ-9 assigned to
8.
IRQ-10 assigned to
9.
IRQ-11 assigned to
10.
IRQ-12 assigned to
11.
IRQ-13 assigned to
12.
IRQ-14 assigned to
13.
IRQ-15 assigned to
The above options all have the same default and the same options. These are listed below.
Î PCI Device
(D
EFAULT
)
The IRQ is assigned to legacy ISA for devices compliant
with the original PC AT bus specification, PCI/ISA PNP for
devices compliant with the Plug and Play standard
whether designed for PCI or ISA bus architecture.
with the original PC AT bus specification, PCI/ISA PNP for
devices compliant with the Plug and Play standard
whether designed for PCI or ISA bus architecture.
Î Reserved
The IRQ is reserved by BIOS
Î
Memory Resources [Press Enter]
This option allows you to appoint low memory for non-PNP legacy devices. Choices are:
Reserved Memory Base and Reserved Memory Length. The memory Base options are NA,
C800, CC00, D000, D400, D800, and DC00. The Memory Length options are 8K, 16K, 32K, and
64K.
Reserved Memory Base and Reserved Memory Length. The memory Base options are NA,
C800, CC00, D000, D400, D800, and DC00. The Memory Length options are 8K, 16K, 32K, and
64K.
Î
PCI/VGA Palette Snoop [Disabled]
The PCI/VGA Palette Snoop option allows you determine whether or not some special VGA
cards, high-end hardware MPEG decoders and other similar devices are allowed to look at the
VGA palette on the video card so these devices can determine what colors are in use. This option
is only very rarely needed. It should be left at "Disabled" unless a video device specifically
requires the setting enabled upon installation.
cards, high-end hardware MPEG decoders and other similar devices are allowed to look at the
VGA palette on the video card so these devices can determine what colors are in use. This option
is only very rarely needed. It should be left at "Disabled" unless a video device specifically
requires the setting enabled upon installation.
Î Disabled
(D
EFAULT
)
Does not allow the graphics devices to examine the VGA
palette on the graphics card
palette on the graphics card
Î Enabled
Does allow the graphics devices to examine the VGA
palette on the graphics card
palette on the graphics card