Fusion Electronics Automobile Alarm CE-99200 Manuale Utente

1.   Turn the ignition switch ‘OFF/ON’ 3 times (within 15 seconds) 
 

and leave in the ON position.

2.   Push the valet switch 3 times, and hold on the 3rd push until a long  
 

chirp is heard from the siren, and then release the valet switch. You  

 

are now in the remote programming mode.

3.   Press and hold any button of the remote until the siren responds  
 

with a confirming chirp, this indicates the remote has been stored  

 into 

memory.

4.   If you have additional remotes (up to 4 in total) that need to be 
 

programmed, repeat step 3 for each remote.

Exit Programming: Turn ignition to ‘OFF’ position, or wait for 15 
seconds. Three long chirps and three indicator light flashes will 
confirm exit.

Note: This mode will only retain the last 4 remote transmitters 
programmed. If the remote memory is exceeded, the security system will 
start deleting remote’s from memory in chronological order.

ALARM FEATURE “I” PROGRAMMING: 

1.   Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds) 
 

and leave in the OFF position on the 3rd time. 

2.   Push the valet switch twice, and hold on the 2nd push until one  
 

short chirp, followed by one long chirp is heard then release the valet  

 

switch. You are now in the alarm feature ‘I’ programming mode.

3. A; Press and release the remote button   corresponding to the 
 

feature ‘1’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting

 
 

B; Press and release the remote button   corresponding to the 

 

feature ‘2’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting

 
 

C; Press and release the remote buttons   +   corresponding to  

 

the feature ‘3’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting

Note: The factory default setting is always [1] LED flash, [1] chirp.

Press remote
button

One Chirp / LED one 
flash
Factory Default 
Setting

Two Chirps / LED two 
flashes

1   

Chirps on

Chirps off

2   

Automatic Rearm On

Automatic Rearm Off

3    +   

Instant Door Ajar 
Warning

45 second Delay Door 
Ajar warning

Exit Programming: Turn ignition to ‘ON’ position, or wait 15 seconds. 
Three long chirps will confirm exit.