Fusion Electronics Automobile Alarm CE-99200 Manuale Utente

1.   Turn the Ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds), 
 

and leave in the OFF position. 

2.   Push the valet switch 4 times and hold on the 4th push until two short  
 

chirps and one long chirp is heard, and then release the valet switch.  

 

You are now in the alarm feature ‘II’ programming mode.

3. A; Press and release the remote button   corresponding to the 
 

feature ‘1’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting.

 

B; Press and release the remote button   corresponding to the 

 

feature ‘2’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting.

 

C; Press and release the remote buttons   +   corresponding to  

 

the feature ‘3’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting.

Note: The factory default setting is always [1] LED flash, [1] chirp.

Press 
remote
button

One Chirp / 
LED one flash
Factory 
Default Setting

Two Chirps / 
LED two flashes

Three Chirps / 
LED three flashes

1   

0.9 - second 
door lock 
pulses

3.0 - second 
door lock pulse

double pulse 
unlock

2   

Active arming

Passive arming 
without passive 
door locking

Passive arming 
with passive door 
locking

3    +   

Ignition 
controlled door 
locks & unlocks

Without ignition 
controlled door 
locks & unlocks

Exit Programming: Turn ignition to ‘ON’ position, or wait for 
15 seconds. Three long chirps will confirm exit.

1.   Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds), 
 

and leave in the OFF position. 

2.   Push the valet switch 6 times and hold on the 6th push until three  
 

short chirps and one long chirp is heard, and then release the valet  

 

switch. You are now in the Alarm feature ‘III’ programming mode.

3. A; Press and release the remote button   corresponding to the 
 

feature ‘1’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting.

 
 

B; Press and release the remote button   corresponding  

 

 

to the feature ‘2’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting.

 
 

C; Press and release the remote buttons   +   corresponding to  

 

the feature ‘3’ to be changed. 

 

The siren will chirp and the LED will indicate the new setting.

Note: The factory default setting is always [1] LED flash, [1] chirp.

Press remote
button

One Chirp / LED one 
flash
Factory Default 
Setting

Two Chirps / LED 
two flashes

1   

Shock sensor 
program mode

2   

Red/white wire = 
trunk/boot (Channel 
3) output

Red/white wire = 
two step door unlock 
output

3    +   

Anti car jacking off

Anti car jacking on

Exit Programming: Turn Ignition to ‘ON’ position, or wait for 15 
seconds. Three long chirps will confirm exit.